Unibuff is a metalised emulision polish. A floor protected with Unibuff will have slip resistance, from its optimised blend of polymers and waxes, durability, from a zinc cross-linked polymer and a prestigious gloss which can be maintained by regular buffing.
Unibuff is compatible with many types of flooring including linoleum, thermoplastics, tiles, sealed wood and concrete.
5 litres of polish should give a coverage of 400-500 square metres. Depending on floor traffic this coverage should last for several months.
Sold in pack of 1 x 5ltr
How To Use:
Preperation - For bare floors, thoroughly clean the floor. Ensure porous floors are sealed. Alternatively, strip off old polish and remove the slurry. Rinse well with fresh water and allow to dry.
Application - Apply a coat of undiluted Unibuff, evenly and sparingly, with an applicator or mop. Allow to dry, with adequate ventilation, then apply a second coat as before. Allow to dry for 12 hours.
Maintenance - Sweep daily. At regular inervals, damp-mop or spray-clean with floor maintainer, buffing to renew shine. Periodically strip off and reapply Unibuff.
Shelf Life: 2 Years
This product has been formulated to have very little ecological impact and is an ideal choice for enviornmentally aware organisations.
||Free of dye/perfumes:
||Biodegradable outer box:
Ingestion - Drink a glass of water to dilute product. Do not induce vomiting. Act immediately to prevent further irritation of mouth, throat and stomach mucosa.
Inhilation - No ill effects expected at concentrations used. If irritation is experienced go in open air and ventilate area. Mouth and throat may be rinsed with water.
Eye Contact - Check for and remove contact lenses. Rinse thoroughly with plenty of water for several minutes.
Skin Contact - Rinse affected area with water as instructed, if needed apply a cold compress to relieve irritation.
Store upright in original containers in a cool dry area out of the reach of children.